Syslog 和 OpenSearch 集成

[[inputs.syslog]]
  ## Protocol, address and port to host the syslog receiver.
  ## If no host is specified, then localhost is used.
  ## If no port is specified, 6514 is used (RFC5425#section-4.1).
  ##   ex: server = "tcp://localhost:6514"
  ##       server = "udp://:6514"
  ##       server = "unix:///var/run/telegraf-syslog.sock"
  ## When using tcp, consider using 'tcp4' or 'tcp6' to force the usage of IPv4
  ## or IPV6 respectively. There are cases, where when not specified, a system
  ## may force an IPv4 mapped IPv6 address.
  server = "tcp://127.0.0.1:6514"

  ## Permission for unix sockets (only available on unix sockets)
  ## This setting may not be respected by some platforms. To safely restrict
  ## permissions it is recommended to place the socket into a previously
  ## created directory with the desired permissions.
  ##   ex: socket_mode = "777"
  # socket_mode = ""

  ## Maximum number of concurrent connections (only available on stream sockets like TCP)
  ## Zero means unlimited.
  # max_connections = 0

  ## Read timeout (only available on stream sockets like TCP)
  ## Zero means unlimited.
  # read_timeout = "0s"

  ## Optional TLS configuration (only available on stream sockets like TCP)
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key  = "/etc/telegraf/key.pem"
  ## Enables client authentication if set.
  # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]

  ## Maximum socket buffer size (in bytes when no unit specified)
  ## For stream sockets, once the buffer fills up, the sender will start
  ## backing up. For datagram sockets, once the buffer fills up, metrics will
  ## start dropping. Defaults to the OS default.
  # read_buffer_size = "64KiB"

  ## Period between keep alive probes (only applies to TCP sockets)
  ## Zero disables keep alive probes. Defaults to the OS configuration.
  # keep_alive_period = "5m"

  ## Content encoding for message payloads
  ## Can be set to "gzip" for compressed payloads or "identity" for no encoding.
  # content_encoding = "identity"

  ## Maximum size of decoded packet (in bytes when no unit specified)
  # max_decompression_size = "500MB"

  ## Framing technique used for messages transport
  ## Available settings are:
  ##   octet-counting  -- see RFC5425#section-4.3.1 and RFC6587#section-3.4.1
  ##   non-transparent -- see RFC6587#section-3.4.2
  # framing = "octet-counting"

  ## The trailer to be expected in case of non-transparent framing (default = "LF").
  ## Must be one of "LF", or "NUL".
  # trailer = "LF"

  ## Whether to parse in best effort mode or not (default = false).
  ## By default best effort parsing is off.
  # best_effort = false

  ## The RFC standard to use for message parsing
  ## By default RFC5424 is used. RFC3164 only supports UDP transport (no streaming support)
  ## Must be one of "RFC5424", or "RFC3164".
  # syslog_standard = "RFC5424"

  ## Character to prepend to SD-PARAMs (default = "_").
  ## A syslog message can contain multiple parameters and multiple identifiers within structured data section.
  ## Eg., [id1 name1="val1" name2="val2"][id2 name1="val1" nameA="valA"]
  ## For each combination a field is created.
  ## Its name is created concatenating identifier, sdparam_separator, and parameter name.
  # sdparam_separator = "_"

[[outputs.opensearch]]
  ## URLs
  ## The full HTTP endpoint URL for your OpenSearch instance. Multiple URLs can
  ## be specified as part of the same cluster, but only one URLs is used to
  ## write during each interval.
  urls = ["http://node1.os.example.com:9200"]

  ## Index Name
  ## Target index name for metrics (OpenSearch will create if it not exists).
  ## This is a Golang template (see https://pkg.go.dev/text/template)
  ## You can also specify
  ## metric name (`{{.Name}}`), tag value (`{{.Tag "tag_name"}}`), field value (`{{.Field "field_name"}}`)
  ## If the tag does not exist, the default tag value will be empty string "".
  ## the timestamp (`{{.Time.Format "xxxxxxxxx"}}`).
  ## For example: "telegraf-{{.Time.Format \"2006-01-02\"}}-{{.Tag \"host\"}}" would set it to telegraf-2023-07-27-HostName
  index_name = ""

  ## Timeout
  ## OpenSearch client timeout
  # timeout = "5s"

  ## Sniffer
  ## Set to true to ask OpenSearch a list of all cluster nodes,
  ## thus it is not necessary to list all nodes in the urls config option
  # enable_sniffer = false

  ## GZIP Compression
  ## Set to true to enable gzip compression
  # enable_gzip = false

  ## Health Check Interval
  ## Set the interval to check if the OpenSearch nodes are available
  ## Setting to "0s" will disable the health check (not recommended in production)
  # health_check_interval = "10s"

  ## Set the timeout for periodic health checks.
  # health_check_timeout = "1s"
  ## HTTP basic authentication details.
  # username = ""
  # password = ""
  ## HTTP bearer token authentication details
  # auth_bearer_token = ""

  ## Optional TLS Config
  ## Set to true/false to enforce TLS being enabled/disabled. If not set,
  ## enable TLS only if any of the other options are specified.
  # tls_enable =
  ## Trusted root certificates for server
  # tls_ca = "/path/to/cafile"
  ## Used for TLS client certificate authentication
  # tls_cert = "/path/to/certfile"
  ## Used for TLS client certificate authentication
  # tls_key = "/path/to/keyfile"
  ## Send the specified TLS server name via SNI
  # tls_server_name = "kubernetes.example.com"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

  ## Template Config
  ## Manage templates
  ## Set to true if you want telegraf to manage its index template.
  ## If enabled it will create a recommended index template for telegraf indexes
  # manage_template = true

  ## Template Name
  ## The template name used for telegraf indexes
  # template_name = "telegraf"

  ## Overwrite Templates
  ## Set to true if you want telegraf to overwrite an existing template
  # overwrite_template = false

  ## Document ID
  ## If set to true a unique ID hash will be sent as
  ## sha256(concat(timestamp,measurement,series-hash)) string. It will enable
  ## data resend and update metric points avoiding duplicated metrics with
  ## different id's
  # force_document_id = false

  ## Value Handling
  ## Specifies the handling of NaN and Inf values.
  ## This option can have the following values:
  ##    none    -- do not modify field-values (default); will produce an error
  ##               if NaNs or infs are encountered
  ##    drop    -- drop fields containing NaNs or infs
  ##    replace -- replace with the value in "float_replacement_value" (default: 0.0)
  ##               NaNs and inf will be replaced with the given number, -inf with the negative of that number
  # float_handling = "none"
  # float_replacement_value = 0.0

  ## Pipeline Config
  ## To use a ingest pipeline, set this to the name of the pipeline you want to use.
  # use_pipeline = "my_pipeline"

  ## Pipeline Name
  ## Additionally, you can specify a tag name using the notation (`{{.Tag "tag_name"}}`)
  ## which will be used as the pipeline name (e.g. "{{.Tag \"os_pipeline\"}}").
  ## If the tag does not exist, the default pipeline will be used as the pipeline.
  ## If no default pipeline is set, no pipeline is used for the metric.
  # default_pipeline = ""