Kafka 和 TimescaleDB 集成

[[inputs.kafka_consumer]]
              ## Kafka brokers.
              brokers = ["localhost:9092"]

              ## Set the minimal supported Kafka version. Should be a string contains
              ## 4 digits in case if it is 0 version and 3 digits for versions starting
              ## from 1.0.0 separated by dot. This setting enables the use of new
              ## Kafka features and APIs.  Must be 0.10.2.0(used as default) or greater.
              ## Please, check the list of supported versions at
              ## https://pkg.go.dev/github.com/Shopify/sarama#SupportedVersions
              ##   ex: kafka_version = "2.6.0"
              ##   ex: kafka_version = "0.10.2.0"
              # kafka_version = "0.10.2.0"

              ## Topics to consume.
              topics = ["telegraf"]

              ## Topic regular expressions to consume.  Matches will be added to topics.
              ## Example: topic_regexps = [ "*test", "metric[0-9A-z]*" ]
              # topic_regexps = [ ]

              ## When set this tag will be added to all metrics with the topic as the value.
              # topic_tag = ""

              ## The list of Kafka message headers that should be pass as metric tags
              ## works only for Kafka version 0.11+, on lower versions the message headers
              ## are not available
              # msg_headers_as_tags = []

              ## The name of kafka message header which value should override the metric name.
              ## In case when the same header specified in current option and in msg_headers_as_tags
              ## option, it will be excluded from the msg_headers_as_tags list.
              # msg_header_as_metric_name = ""

              ## Set metric(s) timestamp using the given source.
              ## Available options are:
              ##   metric -- do not modify the metric timestamp
              ##   inner  -- use the inner message timestamp (Kafka v0.10+)
              ##   outer  -- use the outer (compressed) block timestamp (Kafka v0.10+)
              # timestamp_source = "metric"

              ## Optional Client id
              # client_id = "Telegraf"

              ## Optional TLS Config
              # enable_tls = false
              # tls_ca = "/etc/telegraf/ca.pem"
              # tls_cert = "/etc/telegraf/cert.pem"
              # tls_key = "/etc/telegraf/key.pem"
              ## Use TLS but skip chain & host verification
              # insecure_skip_verify = false

              ## Period between keep alive probes.
              ## Defaults to the OS configuration if not specified or zero.
              # keep_alive_period = "15s"

              ## SASL authentication credentials.  These settings should typically be used
              ## with TLS encryption enabled
              # sasl_username = "kafka"
              # sasl_password = "secret"

              ## Optional SASL:
              ## one of: OAUTHBEARER, PLAIN, SCRAM-SHA-256, SCRAM-SHA-512, GSSAPI
              ## (defaults to PLAIN)
              # sasl_mechanism = ""

              ## used if sasl_mechanism is GSSAPI
              # sasl_gssapi_service_name = ""
              # ## One of: KRB5_USER_AUTH and KRB5_KEYTAB_AUTH
              # sasl_gssapi_auth_type = "KRB5_USER_AUTH"
              # sasl_gssapi_kerberos_config_path = "/"
              # sasl_gssapi_realm = "realm"
              # sasl_gssapi_key_tab_path = ""
              # sasl_gssapi_disable_pafxfast = false

              ## used if sasl_mechanism is OAUTHBEARER
              # sasl_access_token = ""

              ## SASL protocol version.  When connecting to Azure EventHub set to 0.
              # sasl_version = 1

              # Disable Kafka metadata full fetch
              # metadata_full = false

              ## Name of the consumer group.
              # consumer_group = "telegraf_metrics_consumers"

              ## Compression codec represents the various compression codecs recognized by
              ## Kafka in messages.
              ##  0 : None
              ##  1 : Gzip
              ##  2 : Snappy
              ##  3 : LZ4
              ##  4 : ZSTD
              # compression_codec = 0
              ## Initial offset position; one of "oldest" or "newest".
              # offset = "oldest"

              ## Consumer group partition assignment strategy; one of "range", "roundrobin" or "sticky".
              # balance_strategy = "range"

              ## Maximum number of retries for metadata operations including
              ## connecting. Sets Sarama library's Metadata.Retry.Max config value. If 0 or
              ## unset, use the Sarama default of 3,
              # metadata_retry_max = 0

              ## Type of retry backoff. Valid options: "constant", "exponential"
              # metadata_retry_type = "constant"

              ## Amount of time to wait before retrying. When metadata_retry_type is
              ## "constant", each retry is delayed this amount. When "exponential", the
              ## first retry is delayed this amount, and subsequent delays are doubled. If 0
              ## or unset, use the Sarama default of 250 ms
              # metadata_retry_backoff = 0

              ## Maximum amount of time to wait before retrying when metadata_retry_type is
              ## "exponential". Ignored for other retry types. If 0, there is no backoff
              ## limit.
              # metadata_retry_max_duration = 0

              ## When set to true, this turns each bootstrap broker address into a set of
              ## IPs, then does a reverse lookup on each one to get its canonical hostname.
              ## This list of hostnames then replaces the original address list.
              ## resolve_canonical_bootstrap_servers_only = false

              ## Strategy for making connection to kafka brokers. Valid options: "startup",
              ## "defer". If set to "defer" the plugin is allowed to start before making a
              ## connection. This is useful if the broker may be down when telegraf is
              ## started, but if there are any typos in the broker setting, they will cause
              ## connection failures without warning at startup
              # connection_strategy = "startup"

              ## Maximum length of a message to consume, in bytes (default 0/unlimited);
              ## larger messages are dropped
              max_message_len = 1000000

              ## Max undelivered messages
              ## This plugin uses tracking metrics, which ensure messages are read to
              ## outputs before acknowledging them to the original broker to ensure data
              ## is not lost. This option sets the maximum messages to read from the
              ## broker that have not been written by an output.
              ##
              ## This value needs to be picked with awareness of the agent's
              ## metric_batch_size value as well. Setting max undelivered messages too high
              ## can result in a constant stream of data batches to the output. While
              ## setting it too low may never flush the broker's messages.
              # max_undelivered_messages = 1000

              ## Maximum amount of time the consumer should take to process messages. If
              ## the debug log prints messages from sarama about 'abandoning subscription
              ## to [topic] because consuming was taking too long', increase this value to
              ## longer than the time taken by the output plugin(s).
              ##
              ## Note that the effective timeout could be between 'max_processing_time' and
              ## '2 * max_processing_time'.
              # max_processing_time = "100ms"

              ## The default number of message bytes to fetch from the broker in each
              ## request (default 1MB). This should be larger than the majority of
              ## your messages, or else the consumer will spend a lot of time
              ## negotiating sizes and not actually consuming. Similar to the JVM's
              ## `fetch.message.max.bytes`.
              # consumer_fetch_default = "1MB"

              ## Data format to consume.
              ## Each data format has its own unique set of configuration options, read
              ## more about them here:
              ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
              data_format = "influx"

# Publishes metrics to a TimescaleDB database
[[outputs.postgresql]]
  ## Specify connection address via the standard libpq connection string:
  ##   host=... user=... password=... sslmode=... dbname=...
  ## Or a URL:
  ##   postgres://[user[:password]]@localhost[/dbname]?sslmode=[disable|verify-ca|verify-full]
  ## See https://postgresql.ac.cn/docs/current/libpq-connect.html#LIBPQ-CONNSTRING
  ##
  ## All connection parameters are optional. Environment vars are also supported.
  ## e.g. PGPASSWORD, PGHOST, PGUSER, PGDATABASE
  ## All supported vars can be found here:
  ##  https://postgresql.ac.cn/docs/current/libpq-envars.html
  ##
  ## Non-standard parameters:
  ##   pool_max_conns (default: 1) - Maximum size of connection pool for parallel (per-batch per-table) inserts.
  ##   pool_min_conns (default: 0) - Minimum size of connection pool.
  ##   pool_max_conn_lifetime (default: 0s) - Maximum connection age before closing.
  ##   pool_max_conn_idle_time (default: 0s) - Maximum idle time of a connection before closing.
  ##   pool_health_check_period (default: 0s) - Duration between health checks on idle connections.
  # connection = ""

  ## Postgres schema to use.
  # schema = "public"

  ## Store tags as foreign keys in the metrics table. Default is false.
  # tags_as_foreign_keys = false

  ## Suffix to append to table name (measurement name) for the foreign tag table.
  # tag_table_suffix = "_tag"

  ## Deny inserting metrics if the foreign tag can't be inserted.
  # foreign_tag_constraint = false

  ## Store all tags as a JSONB object in a single 'tags' column.
  # tags_as_jsonb = false

  ## Store all fields as a JSONB object in a single 'fields' column.
  # fields_as_jsonb = false

  ## Name of the timestamp column
  ## NOTE: Some tools (e.g. Grafana) require the default name so be careful!
  # timestamp_column_name = "time"

  ## Type of the timestamp column
  ## Currently, "timestamp without time zone" and "timestamp with time zone"
  ## are supported
  # timestamp_column_type = "timestamp without time zone"

  ## Templated statements to execute when creating a new table.
  # create_templates = [
  #   '''CREATE TABLE {{ .table }} ({{ .columns }})''',
  # ]

  ## Templated statements to execute when adding columns to a table.
  ## Set to an empty list to disable. Points containing tags for which there is
  ## no column will be skipped. Points containing fields for which there is no
  ## column will have the field omitted.
  # add_column_templates = [
  #   '''ALTER TABLE {{ .table }} ADD COLUMN IF NOT EXISTS {{ .columns|join ", ADD COLUMN IF NOT EXISTS " }}''',
  # ]

  ## Templated statements to execute when creating a new tag table.
  # tag_table_create_templates = [
  #   '''CREATE TABLE {{ .table }} ({{ .columns }}, PRIMARY KEY (tag_id))''',
  # ]

  ## Templated statements to execute when adding columns to a tag table.
  ## Set to an empty list to disable. Points containing tags for which there is
  ## no column will be skipped.
  # tag_table_add_column_templates = [
  #   '''ALTER TABLE {{ .table }} ADD COLUMN IF NOT EXISTS {{ .columns|join ", ADD COLUMN IF NOT EXISTS " }}''',
  # ]

  ## The postgres data type to use for storing unsigned 64-bit integer values
  ## (Postgres does not have a native unsigned 64-bit integer type).
  ## The value can be one of:
  ##   numeric - Uses the PostgreSQL "numeric" data type.
  ##   uint8 - Requires pguint extension (https://github.com/petere/pguint)
  # uint64_type = "numeric"

  ## When using pool_max_conns > 1, and a temporary error occurs, the query is
  ## retried with an incremental backoff. This controls the maximum duration.
  # retry_max_backoff = "15s"

  ## Approximate number of tag IDs to store in in-memory cache (when using
  ## tags_as_foreign_keys). This is an optimization to skip inserting known
  ## tag IDs. Each entry consumes approximately 34 bytes of memory.
  # tag_cache_size = 100000

  ## Cut column names at the given length to not exceed PostgreSQL's
  ## 'identifier length' limit (default: no limit)
  ## (see https://postgresql.ac.cn/docs/current/limits.html)
  ## Be careful to not create duplicate column names!
  # column_name_length_limit = 0

  ## Enable & set the log level for the Postgres driver.
  # log_level = "warn" # trace, debug, info, warn, error, none